FA

SELECT * FROM `product` WHERE product_services=16 LIMIT 0,10

Automotive Air Filters

Industrial Services    2019 Jan 14    0   271

A vehicle air filter protects the engine and is used to prevent the engine from being damaged by dust or other contamination particles. It’s designed in different shapes for different kinds of cars. Introduction of Nano-technology to filter industry is the most

Heavy Truck Air Filter

Industrial Services    2019 Jan 14    0   233

One of the latest advancements in Filtration is the use of Nano Technology. With this technique surface large cellulose and synthetic fibers (usually with a diameter of 10 to 50 µm) covered with very fine nanofibers (usually with a diameter of 50 to 400 Nm). Usi&l

Spray Pyrolysis System

Industrial Services    2018 Oct 13    0   214

The IRASOL spray pyrolysis system is specifically designed to make thin films in solution-based methods and can deposit layers with nanometric scale precision. 

Ultrasonic Spray System

Industrial Services    2019 Apr 17    0   217

The Ultrasonic Spray System is a device developed for the fabrication and deposition of thin films via spray. 

Pharmaceutical Freeze Dryer

Industrial Services    2018 Oct 13    0   229

Freeze drying pharmaceuticals uses a process called lyophilization to lower the temperature of the product to below freezing, and then a high-pressure vacuum is applied to extract the water in the form of vapor.

Low Temperature Plasma Sterilizer

Industrial Services    2019 Apr 17    0   229

Plasma sterilization is a low-temperature sterilization technique which can increase the efficiency of medical equipment.

Nanobubble Generator

Industrial Services    2018 Oct 13    0   242

Nanobubble Technology is an emerging highly efficient technology to disperse different gases such as air, oxygen, ozone, nitrogen, carbon dioxide and so on into the liquids.

ArcaJet Printer

Industrial Services    2018 Oct 13    0   201

ArcaJet is an inkjet printer capable of printing different conductive and semi-conductive inks.

Single and Double Side Optical Mask Aligner

Industrial Services    2019 Apr 24    0   223

Photolithography is a process used in microfabrication to transfer geometric patterns to a film or substrate.

Desktop Lithography System

Industrial Services    2019 Apr 24    0   225

Photolithography is a process used in microfabrication to transfer geometric patterns to a film or substrate.